Enclosure Network Configuration Commands - HP Bc1500 - BladeSystem - Blade PC User Manual

Enclosure Network Configuration Commands

Enclosure Network Configuration Commands
Command
ADD SNMP
TRAPRECEIVER
<IP address>
DISABLE
SECURESH
DISABLE SNMP
DISABLE
TELNET
DISABLE WEB
DOWNLOAD
CONFIG
<url>
ENABLE
SECURESH
ENABLE SNMP
HP PC Blade Enclosure Integrated Administrator for CCI v1.4 User Guide
Description
Adds an IP address to receive SNMP traps.
Only v1 traps are supported. Traps are directed to
the SNMP default port of 162.
Disables Secure Shell account to the Integrated
Administrator.
Disables SNMP support for the Integrated
Administrator.
Does not clear the SNMP trap receivers that have
been configured. SNMP trap receivers can still be
added and removed. If SNMP is disabled, Systems
Insight Manage agents do not work properly.
Disables Telnet access to the Integrated
Administrator.
Disables HTTP and HTTPS access to the Integrated
Administrator.
This command prevents access to the Web-based
user interface.
Downloads previously saved configuration file from a
specific IP host.
Downloads a previously saved configuration file from
a specific IP host.
The files are auto-executed in script mode. The file is
not allowed to change the password of the
Administrator account. Supported protocols are http,
ftp, and tftp. Format the URL as
protocol://host/path/file. If your ftp server does
not support anonymous connections, you can specify
a user name and password by replacing the host
part in the previous format with
username:password@host.
Enables Secure Shell account to the Integrated
Administrator.
Enables SNMP support for the Integrated
Administrator.
Command Line Interface
Restrictions
Only enclosure
administrator may
execute this
command.
Only enclosure
administrators may
execute this
command.
Only enclosure
administrators may
execute this
command.
Only enclosure
administrators may
execute this
command.
Only enclosure
administrators may
execute this
command.
Only enclosure
administrators may
execute this
command.
The IP address must
be in the form
###.###.###.###
where ### ranges
from 0 to 255.
Only enclosure
administrators may
execute this
command.
Only enclosure
administrators may
execute this
command.
5-9