Setting Up Automatic Time Configuration (Ntp) - HP BladeSystem bc2000 - Blade PC User Manual

Setting Up Automatic Time Configuration (NTP)

Automatic time configuration allows the Integrated Administrator to synchronize its date and time with
an NTP capable device supporting the Network Time Protocol (NTP).
Table 6-4 Automatic Time Configuration Commands
Function
Set the NTPpoll interval*
Set the primary NTP server
Set the secondary NTP server
Disable the secondary NTP server
Enable NTP
Disable NTP
* If an NTP poll interval is not set, it will default to 720 seconds. The minimum time is 60 seconds and
the maximum time is 9999 seconds.
ENWW
Command
SET NTP POLL
<seconds>
SET NTP PRIMARY
<ip address>
SET NTP SECONDARY <ip address>
SET NTP SECONDARY NONE
ENABLE NTP
DISABLE NTP
Setting Up Automatic Time Configuration (NTP) 85