Identifying Problem Components - HP Bc1500 - BladeSystem - Blade PC User Manual

SHOW ENCLOSURE INFO
This command displays the enclosure name and enclosure type; the software and hardware
version of the Integrated Administrator; the part number, serial number, and asset tag number of
the enclosure; the MAC address of the Integrated Administrator; and the type, part number, and
serial number of the interconnect tray.
SHOW ENCLOSURE POWERSUPPLY [<power supply number> | ALL]
This command displays the status, AC input status, capacity, input voltage range #1 (Volts),
input voltage range #2 (Volts), input frequency range (Hz), part number, serial number, and
hardware revision for one or all power supplies in the enclosure.
SHOW ENCLOSURE STATUS
This command displays the status of enclosure health, Integrated Administrator health, and the
Unit Identification LED under the heading "enclosure status," and displays the status and
capacity of the power supplies of the enclosure under the heading "power status."
SHOW ENCLOSURE TEMP
This command displays the location, status (OK, warm, degraded, or failed), and temperature
(degrees Fahrenheit and Celsius) for all the temperature sensors of the enclosure.

Identifying Problem Components

The Integrated Administrator alerts you to problem conditions or failed components in the
enclosure, such as:
■
A fan
■
A power supply
■
A blade PC
■
Over-temperature conditions
If the enclosure enters a degraded state at any time, the Web-based user interface of the
Integrated Administrator alerts the user with icons along the top of the deck panel.
HP PC Blade Enclosure Integrated Administrator for CCI v1.4 User Guide
Performing Common Administrative Tasks
7-9