Braun VitalScan Plus BP 1650 Manual page 9

BP 1600: The readings of the last 10 measurements are stored in memory.
BP 1650: The readings of the last 20 measurements with time and date are stored
in memory. The lower display line successively shows date, time and
pulse of the respective measurement.
Date
Setting time and date (BP 1650 only)
• Push the time/date button (C). The lower display line shows «Time» and
flashing digits in the «hour» position. To adjust the hours, repeatedly
push the «memo» button.
T im e
• Push button (C) again: The minutes digits will flash. Again, repeatedly
push the «memo» button to adjust the minutes.
• Push button (C) again to adjust the date: The lower display line shows
«Date» and flashing digits in the month position. Adjust the month by
repeatedly pushing the «memo» button.
• Push button (C) again: The day digits will flash. Again, repeatedly push
the «memo» button to adjust the day.
• To exit the time and date setting mode, push button (C).
• Otherwise the device automatically turns off after 2 minutes and
activates the settings made so far.
Time
Time
Puls
1/min
T im e
9