Copy Setup; Changing Function Defaults - Olivetti d-Copia 164MF Operation Manual

System Settings
[Menu]
or
1. Common Setup
[OK]
or
110. Eco Fuser
[OK]

Copy Setup

[Menu]
or
2. Copy Setup
[OK]
8-4
1
Access 110. Eco Fuser.
If you are unsure how to use this route map refer to Accessing Menu Items on
page xx.
2
Press or
screen.

Changing Function Defaults

For functions that you use often, changing the default value to the setting will
minimize the time required to make that setting each time the corresponding function
is used. The following table shows the functions for which the default values can be
changed and their available settings. The factory default settings are shown with an
asterisk (*).
Function
21. Def Copy Mode
22. Def Exposure
23. Def Zoom
24. Def Collate
25. Def EcoPrint
1
Access 2. Copy Setup.
If you are unsure how to use this route map refer to Accessing Menu Items on
page xx.
2
Press or
[OK]. The screen for the selected default setting is displayed.
3
Press or
returns to the ready screen.
to select On or Off. Press [OK]. The display returns to the ready
Available Settings
*
Text
Photo
Text + Photo
1 to 7
(Default setting is 4)
*
Original(100%)
Custom(25%-400%)
Fit To Paper
LTR To STM
A4 To A5
STM To LTR
A5 To A4
On
*
Off
On
*
Off
to select the default setting that you want to change and press
to select the new default setting and press [OK]. The display
Reference
page 4-1
page 4-1
page 4-4
page 4-5
page 4-6
OPERATION GUIDE