Table of Contents
Advertisement
Manual Feed Tray
OPERATION GUIDE
3
Adjust the position of the width guides
located on the left and right sides of the
paper cassette. Press the release button on
the left guide and slide the guides to the
paper size required.
NOTE:
The paper sizes are marked on the
cassette.
If using Folio or Oficio II paper, remove the
green stopper
from the paper length
guide and fix into position on the paper
length guide
. Pull the paper length guide
towards the rear until it stops.
4
Load the paper in the cassette.
IMPORTANT: Always adjust the paper
length and width guides before loading
paper to avoid skewed paper feed and/or a
paper jam.
Do not load paper above the triangle mark
located on the width guide.
Ensure the side to be printed is facing down
and the paper is not folded, curled, or
damaged.
5
Push the cassette back into the printer until
it stops.
There is a paper gauge on the right side of
the front of the cassette to indicate the
remaining paper supply.
Paper placed on the Manual Feed Tray is automatically fed and overrides the paper
cassette.
Loading Paper
1
2
2-3
Advertisement
Table of Contents
