Brother MFC9700 Service Manual page 93

(19) Remove a pair of ejection pinch rollers from each of the ejection pinch roller holders R and L.
Ejection pinch roller holder L
(20) Remove the screw from each of the four claw holder plates and take them off.
Next turn each of the separate claw ASSYes from the bottom to align its cutout with the
opening provided in the upper FU frame. Pinch the boss of the separate claw ASSY with
tweezers and take it up.
Boss
Ejection pinch rollers
Separate claw ASSY
Tweezers
IV - 47
Ejection pinch rollers
Ejection pinch roller holder R
Taptite, cup B M3x6
Claw holder plate
Separate claw ASSY
Upper FU frame