Brother MFC-9760 Quick Setup Manual

Quick Setup Guide

MFC-9760
THANK YOU!
... FOR PURCHASING YOUR BROTHER MACHINE.
WE ARE SURE YOU WILL BE IMPRESSED WITH THE
CONVENIENT WAY THAT YOUR NEW MACHINE PERFORMS SO
MANY TASKS WITH GREAT RESULTS!
Follow these simple instructions in numerical order.
For greater detail, consult your Owner's Manual and CD-ROM.
Alternatively, if you cannot solve a problem:
Refer to Frequently Asked Questions (FAQ's) on Brother Solutions
Web Site:
URL: http://solutions.brother.com
Call Brother Customer Service at: 0161 931 2354
2
Install the Drum Unit
A. Unpack the drum unit assembly, and
gently rock it from side to side five or six
times to distribute the toner evenly
inside the cartridge.
To prevent damage to the drum, do not
expose it to light for longer than a few
minutes.
B. Remove the protective part.
5

Load Paper

A. Pull the paper cassette completely out of the
machine.
B. Adjust the paper guides at the right and rear
of the paper cassette for the paper size you
want.
C. Load paper in the paper cassette. Press
down on the paper to flatten it in all four
corners, keeping the paper level below the
guide.
D. Slide the paper cassette into the machine
until it locks into place.
1

Packing List

Drum Unit Assembly
(With Regular
Toner Cartridge)
Mains Power Cord
For USB Cable
Keep the packing materials for possible future transport. If you do not pack the machine properly, it may
void your warranty.
C. Open the front cover of the machine.
D. Insert the drum unit assembly into the
machine.
E. Close the front cover.
Maximum
Paper
Height
Guide
Cable Tie
3

Release the Scanner Lock

Move the lever to the Unlock position as in the diagram below. Please note the
location of the Blue Scanner Lock Lever from the diagram.
Scanner Lock Lever
Lock
If CHECK SCAN LOCK appears on the LCD, check the lever is fully in the
unlock position and press Stop.
4
How to connect the Optional

Paper Tray

A. Carefully pick up the machine and place it on top of the Optional Paper Tray
(Lower Tray).
B. Plug the modular cable from the Lower Tray into the modular jack on the
machine.
To select which tray will be used for faxes or for copies, see Lower Tray (With
Optional Paper Tray Only) in the Owner's Manual and for printer setting, see
Paper Source in the Owner's Manual on the CD-ROM.
If you move the machine after connecting the Lower Tray, be sure to carefully lift
the Lower Tray with the machine because they are not fixed together.
6
Install Mains Power Cord
Turn the power switch ON.
Complete reading this guide before connecting the Parallel or USB cables.
– 1 –
IEEE-1284 Compliant
Bi-directioned Cable
CD-ROM
Owner's Manual
Brother Quick
Setup Guide
Unlock
Mains Power Cord
Version A