Brother MFC9700 Service Manual page 92

(17) From the upper FU frame, remove the screw and take off the idle gear 13. Then slide the
ejection roller to the left and take it out to the front.
Taptite, B M2.3x10
(18) Unlatch each of the four ejection pinch roller holders R and L from the upper FU frame and
take it out. Remove the ejection pinch spring from each of those holders.
Ejection pinch rollers
Upper FU frame
Idle gear 13
Upper FU frame
IV - 46
Ejection pinch rollers
Ejection pinch spring
Ejection roller
Ejection pinch roller holder (R, L)
Latch