Set Count By Amount (^)
An application using incrementing or deincrementing fields (+, -, >, <) will
occasionally require that more than one label be printed with the same values
before the field data is updated. This situation is handled with the ^nn command.
All printers default to 1. This command is set once for the whole label format and
affects all serialized fields in that label format.
^nn
Where:
nn-
Sample:
<STX>L
19000040000000012345<CR>
-001<CR>
^02<CR>
X<CR>
<STX>E0006
<STX>G
The above sample prints two labels with the same field value before
decrementing the field. Six labels are printed.
Feedback possibilities: 0,1,2
TLS PC Link
is a two-digit value that specifies the number of labels to be
generated before the incrementing or deincrementing fields on
the label
TM
Programmer's Guide
35