Brady TLS PC Link Programmer's Manual page 51

Problem
Unable to store an image even
though there is enough memory
available.
Rotation of images does not work.
Receive Label Building Error.
Printer does not print.
46
Possible Cause/Corrective Action
Corrective Action:
Use hardware flow control. When
the serial buffer fills up, the printer
will stop the host from sending more
data. It will re-enable the serial flow
when it catches up.
Possible Cause:
If trying to store an image that
already exists, the printer will only
overwrite that image if it is the only
image that exists.
Corrective Action:
To overwrite an image that already
exists, first delete the image so it can
be re-written. Also, pack image
memory to regain usage of the
memory space that was used by that
file.
Possible Cause:
Printer does not rotate images, only
bar codes and text.
Corrective Action:
Rotate the image with image
software.
Possible Cause:
If a label format calls out an image,
but that image is not stored, a label
building error will be given.
Possible Cause:
Com port settings are not correct.
Corrective Action:
Correct com port settings. Refer to
COM Port Settings on page 6 of this
document.
TM
TLS PC Link Programmer's Guide