Interface Connections - Brady PAM 3600 Quick Operator's Manual

Interface Connections

As standard, the printer is equipped with a bi-directional parallel interface (1) and a serial RS-232-inter-
face with a 9 pin connector (3).
For connection to the parallel interface use a suitable parallel interface cable.
Cables for the serial connection are described in appendix.
NOTICE !
For serial connection, make sure the serial interface RS-232 of the printer is correctly configured
to the settings of your computer (see "Setup" section).
- Connect the computer and the printer with a suitable cable and secure the cable connections with
screws provided on the connectors.
Optional interfaces (ethernet, USB) can be mounted at the interface slot (2).
Information for the optional interfaces can be found in the documentation for the respective interface.
Fig. 12 Interface ports
Additionally PAM 3600 has a PLC interface with 25 pin connector (4). This interface is needed for
embedding the Printer Applicator System in the process control of a higher system and is especially used
to start the printing and applying of the labels.
CAUTION !
Make sure that all connected computers and their connecting cables are correctly grounded.
Printer Applicator System PAM 3600
Connecting the Printer Applicator System
1
2
3
4
13