Brady LabelMark 3.2 User Manual page 54

Table of Contents

LabelMark User Guide

4. From the Type menu, select Printable or Non-Printable. Note: Designating a zone as Non-Printable

makes it unavailable for object placement, i.e., used for clear or open sections of self-laminating labels,

tags, etc.

5. Set the parameters for the specified zone in the Zone Area field, including Width, Height, X Offset,

and Y Offset. See example of dimension specification, below.

Landscape View of Multi-Zone Label

6. Click Apply to set the zone and view its layout in the preview area in the upper right section of the

screen. The active zone will display with a white background; all inactive zones display a pale yellow

background. Note: Make sure that the combined dimensions for all zones, including offsets, do not

exceed the total label size.

A – Top margin

B – Left margin

C – Horizontal gap

D – Vertical gap

E – Label height

F – Printable height

G – Label width

H – Printable width –

Zone 1

I – Non-printable

width – Zone 2

J – Printable width –

Zone 3

Note: X- and Y-

Offset are zero for

this example.

Advanced LabelMark Techniques

Table of Contents