Brady LabelMark 3.2 User Manual page 52

LabelMark User Guide
2. Click Apply to set the zone and view its layout in the preview area in the upper right section of the
screen, and to adjust dimensions if necessary.
3. Click OK to select the new label zone.
4. Click Save Part to Database.
5. Name the part and click OK.
Note: If you choose the Rounded Rectangle option, you have an additional option to determine Corner
Roundness. To define this, use fractional increments that are fifty percent or less of the total maximum zone
dimension. For instance, for a zone with a 0.8" width and 0.335" height, the maximum zone dimension is
0.8", therefore, choose a roundness setting of 0.4" (half of the 0.8") or less. Any higher figure will
essentially result in an oval shape instead of a rectangle with rounded corners.
Multiple label zones
By selecting this option, you will be able to create a label with up to four individual zones.
46 Advanced LabelMark Techniques