Creating Zones On A Label - Brady LabelMark 3.2 User Manual

2. Click the Delete Part tab.
3. Select the Printer type and Part family options for the part you want to delete.
4. Click the custom label part in the list (use Ctrl+click or Shift+click to select more than one part).
5. Click Delete.
Note: Existing label files based on the custom part are unaffected by the deletion.
6. Click Close when finished.

Creating Zones on a Label

LabelMark allows you to create multiple label zones (up to four, printable and non-printable) on an
individual label. You can also set shape and positioning parameters for the separate zones, similar to
Creating a Custom Label Part. The shapes include Rectangle/Square, Circle/Oval, and Rounded Rectangle
and can be positioned using X and Y offsets. In LabelMark, you can insert text and characters into each
zone; in LabelMark Plus, you can also insert text and characters; additionally, you can add bar codes,
graphics, and imported data. Note: LabelMark allows data import also, one zone at a time).
1. Click Label Part Setup
2. The screen displays. Click the Create New Part tab.
3. Within the Create New Part screen, in the Printable Area field, you have three options:
Advanced LabelMark Techniques
on the Standard toolbar or go to File
Advanced LabelMark Techniques
Label Part Setup.
43