Belt Stop System; Fitness Networking - Life Fitness 97Ti Operation Manual

S S
MART TOP TM
The Smart Stop belt stop system (B) senses that a user is standing on the belt. If the user
TM
steps off while the striding belt is in motion, after a brief delay, the system automatically pauses
the workout. During the FIT TEST, the workout is aborted. To continue the workout, press the
ENTER key.
F N
ITNESS ETWORKING
The two interchangeable type RJ45 networking ports (A) are located on the back of the display
console. These network ports, located behind the display console rear access door, allow the
treadmill to be connected to a fitness entertainment system and/or a fitness network, such as
FitLinxx®.
• Networking: The built-in networking ports allow the unit to exchange workout
information with a fitness network database.
• Fitness Entertainment: The built-in network ports allow the treadmill to power a
third-party receiver for use with an entertainment system, such as the Cardio Theater®
system, BroadcastVision
B S S
ELT TOP YSTEM
or Enercise
TM
A
.
TM
13