IBM NetVista X40 User Manual page 78

Installing an adapter
Complete the following steps to install an adapter.
Attention:
damage from static electricity. For details on handling these devices, see "Handling
static-sensitive devices" on page 38.
10. To install the adapter, carefully grasp the adapter by its top edge or upper
® ®
62
IBM IntelliStation E Pro: User's Guide IntelliStation E Pro Types 6836, 6846
Adapter retaining
bracket
When you handle ESD-sensitive devices, take precautions to avoid
1. Review the safety precautions listed in "Safety information" on page 39.
2. Remove any media (diskettes, CDs, or tapes) from the drives and shut down
your operating system.
3. Turn off the computer and all attached devices and disconnect all external
cables and power cords; then, remove the cover. See "Removing the computer
cover" on page 59 for details.
4. Determine which PCI expansion slot you will use for the adapter.
Note: Check the instructions that come with the adapter for any requirements,
restrictions, or cabling instructions. It might be easier for you to route
any device cables before you install the adapter.
5. Rotate the rear adapter retaining bracket to the open (unlocked) position and
remove it from the computer. Keep it in a safe place.
6. Remove the PCI expansion-slot cover. From the rear of the computer, press in
on the slot cover. Grasp it and pull it out of the slot. Store it in a safe place for
future use.
Attention: PCI expansion-slot covers must be installed on all vacant slots.
This maintains the electromagnetic emissions characteristics of the computer
and ensures proper cooling of system components.
7. Touch the static-protective package containing the adapter to any unpainted
metal surface on the computer. Then, remove the adapter from the
static-protective package. Avoid touching the components and gold-edge
connectors on the adapter.
8. Place the adapter, component-side up, on a flat, static-protective surface.
9. Set any jumpers or switches as described by the adapter manufacturer.
corners, and align it with the PCI slot guides; then, press the adapter firmly
into the PCI expansion slot.
Adapter