IBM NetVista X40 User Manual page 27

1. Connect the monitor cable to the monitor connector. Tighten the screws; then,
connect the keyboard cable to the keyboard connector, and connect the mouse
cable to the mouse connector.
Monitor Keyboard
Note: If your computer comes with Windows NT and a ScrollPoint
your mouse will function the first time you start up your computer, but
your mouse will not have its ScrollPoint function. You must shut down
and restart the computer to enable the ScrollPoint function.
2. Connect any additional devices you have.
v Connect a printer or parallel device to the parallel connector.
Parallel
v Connect a serial device or external modem to the serial connector.
Serial
Device
v Connect Universal Serial Bus (USB) devices to either of the USB connectors.
USB
Device
v Connect optional devices, such as speakers, microphones, or headphones, for
models with an audio device.
Audio
Mouse
Chapter 2. Setting up your computer
®
mouse,
11