Device Troubleshooting Charts; Properly - IBM 6643 - NetVista X40 - 128 MB RAM User Manual

Code Description
178x Hard disk or IDE device failed
18xx A PCI adapter has requested an
unavailable resource
1962 No startup device found
2400 Display adapter failed; using
alternate
2462 Video configuration error
5962 IDE CD-ROM configuration error
8601 Pointing device error
8603 Pointing device has been removed

Device troubleshooting charts

You can use the troubleshooting charts in this section to find solutions to
problems that have definite symptoms.
Important
If you find it necessary to remove the computer cover, first read "Safety
information" on page ix for important safety information and instructions.
If you have just added new software or a new computer option and your
computer is not working, do the following before using the troubleshooting
charts:
56
User Guide
Action
1. Go to "Running the IBM
Enhanced Diagnostics program"
on page 70, and follow the
instructions for running the
diagnostic program for the hard
disk drive and IDE devices.
2. If the problem persists, have the
computer serviced.
Go to "Starting and using the
Configuration/Setup Utility program"
on page 31 and follow the instructions
to reconfigure the PCI devices.
1. Go to "Starting and using the
Configuration/Setup Utility
program" on page 31 and follow
the instructions to verify that the
startup sequence is configured

properly.

2. If the problem persists, have the
computer serviced.
Have the computer serviced.
Have the computer serviced.
Have the computer serviced.
Have the computer serviced.
1. Make sure that the pointing device
is properly attached.
2. If the problem persists, have the
computer serviced.