Inserting And Removing A Cd Or Dvd Disc - IBM 6643 - NetVista X40 - 128 MB RAM User Manual

Inserting and removing a CD or DVD disc

To insert a disc:
1. With the computer turned on, press the eject button. The tray slides partway
out of the drive. Manually pull the tray the rest of the way out.
2. Place the disc in the tray with the label facing up, and press the disc down
until it clicks into place and is held by the spring-loaded holders 1 .
3. Close the tray by gently pushing the tray closed. When the tray is closed, the
indicator light on the front of the drive will activate to indicate that the drive
is in use.
To remove a disc:
1. With the computer turned on, press the eject button. When the tray slides out,
manually pull it the rest of the way out and carefully remove the disk.
2. Close the tray by gently pushing the tray closed.
Note: If the tray does not slide out when you press the eject button, insert the end
of an opened paper clip into the emergency-eject hole located the front of
the CD-ROM or DVD-ROM drive.
22
User Guide