Chapter 5.Installing Options; Handling Static-Sensitive Devices - IBM 6643 - NetVista X40 - 128 MB RAM User Manual

Chapter 5. Installing options
You can expand the capabilities of your computer by adding more memory or
optional PCI adapters. Use the instructions in this chapter along with instructions
that might come with the option.
This chapter includes information about removing the rear cover, the hard disk
drive, and the system board cover. To replace these items, you can generally
reverse the removal procedure. If you need additional information when
replacing the hard disk drive and covers, look in the removal procedures.

Handling static-sensitive devices

Static electricity, although harmless to you, can seriously damage computer
components and options. When you add an option, do not open the static-
protective package containing the option until you are instructed to do so.
When you handle options and other computer components, take these
precautions to avoid static electricity damage:
• Limit your movement. Movement can cause static electricity to build up
around you.
• Always handle components carefully.
• Handle adapters and memory modules by the edges. Never touch any
exposed circuitry.
• Prevent others from touching components.
• When you install a new option, touch the static-protective package
containing the option to an unpainted metal surface on the computer for at
least two seconds. This reduces static electricity in the package and your
body.
• When possible, remove the option and install it directly in the computer
without setting the option down. When this is not possible, place the static-
protective package that the option came in on a smooth, level surface and
place the option on it.
• Do not place the option on the computer cover or other metal surface.
© Copyright IBM Corp. 2000
39