Radio Operation; Manual Tuning; Automatic Seek Tuning - Alpine CDA-7878R Owner's Manual

SOURCE
g DN

Manual Tuning

1
Press the SOURCE button until a radio
frequency appears in the display.
2
Press the BAND button repeatedly until the
desired radio band is displayed.
Each press changes the band:
→ FM1 → FM2 → FM3 → MW → LW
3
Press the TUNE button repeatedly until "DX
SEEK" and "SEEK" disappear from the display.
NOTE
The initial mode is DX SEEK.
4
Press the g DN or f UP button to move
downward or upward one step respectively until
the desired station frequency is displayed.
NOTE
The ST indicator appears on the display when a Stereo
FM station is tuned in.
TUNE BAND Preset buttons (1 through 6)
f UP

Automatic Seek Tuning

1
2
3
4

Radio Operation

Press the SOURCE button until a radio
frequency appears in the display.
Press the BAND button repeatedly until the
desired radio band is displayed.
Each press changes the band:
→ FM1 → FM2 → FM3 → MW → LW
Press the TUNE button to illuminate the DX and
SEEK indicators in the display.
With the DX (Distance) mode activated, both
strong and weak stations will be tuned in the
Auto-Seek operation.
Press again to return to the local mode. The DX
indicator will turn off and the SEEK indicator will
remain illuminated. Now, only strong stations will
be tuned.
Press the g DN or f UP button to
automatically seek for a station downward or
upward respectively.
The unit will stop at the next station it finds.
Press the same button again to seek the next
station.
13
-EN