Connections - Alpine CDA-7878R Owner's Manual

Installation and Connections

Connections

ISO Antenna Convertor Plug
(Pink/Black) AUDIO INTERRUPT IN
(Blue/White) REMOTE TURN-ON
(Red) IGNITION
(Black) GND
(Blue) POWER ANT
choke
6
7
coil
(Yellow) BATTERY
=
1
!
>
Ai-NET
NORM EQ/DIV
(Bottom of the unit)
?
3WAY
F/R/Sub-W
(Side of the unit)
#
* When Subwoofer is set to OFF: Output is from Rear speakers.
When Subwoofer is set to ON: Output is from Subwoofer.
For details on how to set the Subwoofer to ON/OFF, see "Subwoofer On and Off" on page 6.
To prevent external noise from entering the audio system.
• Locate the unit and route the leads at least 10 cm away from the car harness.
• Keep the battery power leads as far away from other leads as possible.
• Connect the ground lead securely to a bare metal spot (remove any paint, dirt or grease if necessary) of the car chassis.
• If you add an optional noise suppressor, connect it as far away from the unit as possible. Your Alpine dealer carries
various noise suppressors, contact them for further information.
• Your Alpine dealer knows best about noise prevention measures so consult your dealer for further information.
44
-EN
4
9
8
5
"
(Green)
(Green/Black)
(White)
(White/Black)
(Grey/Black)
(Grey)
(Violet/Black)
(Violet)
Antenna
2
To vehicle phone
3
To amplifier or equalizer
To power antenna
Ignition Key
:
<
-
Amplifier
;
.
Amplifier
;
/
Amplifier
;
Speakers
$
Rear Left
%
&
Front Left
(
)
Front Right
~
+
Rear Right
,
ISO Antenna Plug
Battery
Changer
(Ai-NET)
(Sold Separately)
Speakers
Front
Rear
Subwoofers*