Volume Settings; Ring Volume; Beeper Volume; Speaker Volume - Ricoh SP 1200SF User Manual

Chapter 3

Volume settings

Ring volume

You can choose a ring volume level from a
range of settings, from High to Off.
While in Fax mode press
the volume level. The LCD will show the
current setting, and each key press will
change the volume to the next level. The
machine will keep the new setting until you
change it.
You can also change the ring volume through
the menu:
a
Press Menu, 1, 4, 1.
b
Press a or b to choose Off, Low, Med or
High.
Press OK.
c
Press Stop/Exit.

Beeper volume

When the beeper is on, the machine will beep
when you press a key, make a mistake, or
after you send or receive a fax. You can
choose a range of volume levels, from High
to Off.
a
Press Menu, 1, 4, 2.
b
Press a or b to choose Off, Low, Med or
High.
Press OK.
c
Press Stop/Exit.
24
3
3
or to adjust
3

Speaker volume

You can choose a range of speaker volume
levels, from High to Off.
a
Press Menu, 1, 4, 3.
b
Press a or b to choose Off, Low, Med or
High.
Press OK.
c
Press Stop/Exit.
You can also adjust the speaker volume with
the control panel keys.
a
Press (Fax).
b
Press Hook.
c
Press or .
This setting will stay until you change it
again.
d
Press Hook.
3