Installing The File Management Utility - Brady GlobalMark 2 User Manual

Note:

Installing the File Management Utility

To install the File Management Utility, complete the following steps:
1. Insert the GlobalMark 2 Utilities CD-ROM.
2.
OR If Autorun is disabled, you can begin the installation process manually:
1.
2.
3. Type D:\File Management Utility\Setup.exe and click OK.
Note:
12-10
Working with the File Management Utility
In order to create a cut out graphic (*.cog), you must open the graphic in a
graphic editor and save it as an *.ai file. Then, rename the file with the
*.cog extension in Explorer.
Select Install File Management Utility.
Insert the GlobalMark 2 Utilities CD-ROM.
Click on Start|Run
Follow the InstallShield Wizard's setup instructions until you have
finished the installation. (If an error occurs, please verify that you meet or
exceed the recommended system requirements.)