Supply Saver Option - Brady GlobalMark 2 User Manual

To set print options from within an application
From within the Editor window of any application other than QuickText, press the
<Preferences> key.
Exception:

Supply saver option

Supply saver printing, which is sometimes called multiple up printing, saves tape
and ribbon by arranging labels together in the print queue and printing multiple
labels on the same page.
This option saves tape because it vertically stacks labels that are smaller than the
full width of the tape, so that the full width of the tape is used (see Figure 11-11). It
also saves ribbon because it groups labels to print within a set of ribbon panels.
On the Monocolor and Multicolor systems, the printer adds dashed lines to show
you where to cut the labels apart. On the Color & Cut system, the system cuts out
the individual labels.
Supply saver applies only when:
You are printing multiple labels. (They do not have to be multiple copies of the
same label, as long as they meet the size criteria.)
and
The labels are smaller than one-half of the printable area (to stack vertically)
or
The labels are shorter than one-half of the length of the panel (to group within a
panel length), when you have paneled ribbon installed.
(See Checking Length on page 11-12 for information about paneled ribbon
restrictions.)
Access the Pipe Marker Preference screen also from the Pipe
Marker Style screen. See Setting Pipe Marker preferences on
page 6-37.
Access the Right-to-Know Preferences screen also from the Right-
to-Know Format screen. See Setting Right-to-Know
preferences on page 6-38.
11 21
Printing
-