Adding Cut Out Objects - Brady GlobalMark 2 User Manual

Also, not all tape supplies are appropriate for cutting. If the cutter cannot use the
tape installed in your printer, the Cut out option on the Insert Object screen will
be grayed out.

Adding cut out objects

When you add objects to your label, the Insert Object screen gives you the choice
to insert a Print object or a Cut out object, as shown here:
Figure 10-1. The Insert Object screen on the Color & Cut system.
If you choose Print object, you may only print the object, although in some
cases, the object may be cut around. See Cutting Around Objects - 10-8 to
learn how to cut around a print object.
If you choose Cut out object, the object may only be cut out, and not printed.
Hint!
To create a cut out object
1. From the Editor window (shown in A sample Editor window with cut
bounding box displayed. - 10-9), choose Insert Object.
10-4
Creating Cut Out Objects
You can change some existing print objects to cut out objects and vice-
versa, by going to the General tab on the object's Properties screen and
choosing the appropriate option. See Changing Objects on page 7-31 for
instructions.