Brady GlobalMark 2 User Manual page 99

Each template listed on the Select Template screen represents a pre-designed
layout.
Label size
shows the
output size of
the label with
default
settings
List of
templates
The content of the Select Template screen depends on the type of label you are
creating.
The Category field reflects the category chosen in the previous screen.
The Label size field displays the default size for the template currently
highlighted. This reflects the total output size of the final label, with no changes
applied. The label size is determined by the template you select, however. For
instance, for a scalable-label template, the Label size field is determined in part
by the installed tape size -- the template sets the label to be sized as large as will
fit on the installed tape. Some templates call for preset-size labels, and some
templates produce a fixed-size label only. In both cases, you may not change the
label size. In those cases, the Change Size button is grayed out on the Select
Template screen.
Hint!
The Change Size button may or may not be enabled, according to the template
chosen.
The list of templates provides a miniature graphic representation (called a
"thumbnail") for the highlighted template. This feature may help you choose
the appropriate template for your purpose. In the template shown in Figure 6-8,
6-14
Creating Template Labels
Figure 6-8. The Select Template screen
Some preset labels may also be set to turn on the Supply saver option for
printing. See Supply saver optionn page 11-21 for information.
Disabled for
fixed-size
templates
Thumbnail
representation
of the selected
template