Verifying A File Checksum - Cisco WS-C2948G-GE-TX Configuration Manual

Chapter 34 Working With the Flash File System

Verifying a File Checksum

To verify the checksum of a file on a Flash device, perform this task in privileged mode:
Task
Verify the checksum of a file on a Flash device. verify [[m/]device:] filename
This example shows how to verify the checksum of a file:
Console> (enable) verify cat4000.4-4-1.bin
CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC
CCCCCCCCCCCCCCC
File bootflash:cat4000.4-4-1.bin verified OK
Console> (enable)
Catalyst 4500 Series, Catalyst 2948G, Catalyst 2948G-GE-TX, and Catalyst 2980G Switches Software Configuration Guide—Release 8.2GLX
78-15908-01
Working With the Flash File System on the Switch
Command
34-7