Enabling Gmrp Forward-All Option; Disabling Gmrp Forward-All Option - Cisco WS-C2948G-GE-TX Configuration Manual

Catalyst 4500 series switch
Table of Contents

Advertisement

Chapter 15
Configuring Multicast Services
This example shows how to disable GMRP on ports 6/10–14 and verify the configuration:
Console> (enable) set port gmrp disable 6/10-14
GMRP disabled on ports 6/10-14.
Console> (enable) show gmrp configuration
Global GMRP Configuration:
GMRP Feature is currently enabled on this switch.
GMRP Timers (milliseconds):
Join = 200
Leave = 600
LeaveAll = 10000
Port based GMRP Configuration:
Port
-------------------------------------------- ----------- ------------ ----------
1/1-2,3/1,6/1-9,6/15-48
6/10-14
Console> (enable)

Enabling GMRP Forward-All Option

When you enable GMRP forward-all on a port, a copy of all multicast traffic that is registered on the
switch is forwarded to the port. We recommend enabling this option on any port that is connected to a
router. Forward-all can also forward all registered multicast traffic to a port with a network analyzer or
probe attached.
To forward a copy of all GMRP multicast packets that are registered on the switch to a port, perform this
task in privileged mode:
Task
Enable the GMRP forward-all option on a switch port. set gmrp fwdall enable mod_num/port_num
This example shows how to enable the GMRP forward-all option on port 1/1:
Console> (enable) set gmrp fwdall enable 1/1
GMRP Forward All groups option enabled on port 1/1.
Console> (enable)

Disabling GMRP Forward-All Option

To disable the GMRP forward-all option on a port, perform this task in privileged mode:
Task
Disable the GMRP forward-all option on a port.
This example shows how to disable the GMRP forward-all option on port 1/1:
Console> (enable) set gmrp fwdall disable 1/1
GMRP Forward All groups option disabled on port 1/1.
Console> (enable)
Catalyst 4500 Series, Catalyst 2948G, Catalyst 2948G-GE-TX, and Catalyst 2980G Switches Software Configuration Guide—Release 8.2GLX
78-15908-01
GMRP Status Registration ForwardAll
Enabled
Normal
Disabled
Normal
Command
Command
set gmrp fwdall disable mod_num/port_num
Configuring GMRP
Disabled
Disabled
15-11

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents