Viewing Additional Rrm Settings Using The Cli - Cisco SD2008T-NA Configuration Manual

Viewing Additional RRM Settings Using the CLI

Enter this command to save your settings:
Step 4
save config
Viewing Additional RRM Settings Using the CLI
Use these commands to view additional 802.11a and 802.11b/g RRM settings:
•
•
To troubleshoot RRM-related issues, refer to the Cisco Wireless LAN Controller Command Reference,
Note
Release 3.2 for RRM (airewave-director) debug commands.
Cisco Wireless LAN Controller Configuration Guide
10-28
show advanced 802.11a ?
show advanced 802.11b ?
where ? is one of the following:
ccx—Shows the Cisco Compatible Extensions (CCX) RRM configuration.
channel—Shows the channel assignment configuration and statistics.
logging—Shows the RF event and performance logging.
monitor—Shows the Cisco radio monitoring.
profile—Shows the access point performance profiles.
receiver—Shows the 802.11a or 802.11b/g receiver configuration and statistics.
summary—Shows the configuration and statistics of the 802.11a or 802.11b/g access points
txpower—Shows the transmit power assignment configuration and statistics.
Chapter 10 Configuring Radio Resource ManagementWireless Device Access
OL-1926-06OL-9141-03