Using The Gui To View Voice And Video Settings - Cisco SD2008T-NA Configuration Manual

Configuring Voice and Video Parameters
Click Apply to commit your changes.
Step 7
To enable the radio network, click Network under 802.11a or 802.11b/g, check the 802.11a (or
Step 8
802.11b/g) Network Status check box, and click Apply.
Click Save Configuration to save your changes.
Step 9
Repeat this procedure if you want to configure video parameters for another radio band (802.11a or
Step 10
802.11b/g).

Using the GUI to View Voice and Video Settings

Follow these steps to view voice and video settings using the GUI.
Click Wireless > Clients to access the Clients page (see
Step 1
Figure 4-10
Step 2 Click the Detail link for the desired client to access the Clients > Detail page (see
Cisco Wireless LAN Controller Configuration Guide
4-26
Clients Page
Chapter 4 Configuring Controller SettingsWireless Device Access
Figure 4-10).
Figure 4-11).
OL-9141-03