Table of Contents
Advertisement
Default Settings and Technical Specifications
This appendix provides the factory default settings and technical specifications for the ProSafe
802.11n Dual Band Wireless Access Point WNDAP330.
Factory Default Settings
You can use the reset button located on the front of your device to reset all settings to their factory
defaults. This is called a hard reset.
•
To perform a hard reset, push and hold the reset button for approximately 5 seconds (until the
TEST LED blinks rapidly). Your device will return to the factory configuration settings shown
in
Table A-1
below.
•
Pressing the reset button for a shorter period of time will simply cause your device to reboot.
Table A-1. Access Point Default Configuration Settings
Feature
AP Login
User Login URL
User Name (case sensitive)
Login Password (case sensitive)
Ethernet Connection
Static IP Address
Ethernet MAC Address
Port Speed
Local Network (LAN)
Lan IP
Subnet Mask
Gateway Address
DHCP Server
Default Settings and Technical Specifications
Description
192.168.0.230
admin
password
192.168.0.210
See bottom label.
10/100/1000
192.168.0.230
255.255.255.0
0.0.0.0
Disabled
v1.0, May 2008
Appendix A
A-1
Advertisement
Table of Contents
