Appendix A Factory Default Settings And Technical Specifications; Factory Default Settings - NETGEAR MBR1200 User Manual

Factory Default Settings and Technical
A.
Specifications

Factory Default Settings

You can use the Restore Factory Settings button located on the bottom of your router to reset
all settings to their factory defaults. This is called a hard reset. To perform a hard reset, push
and hold the Restore Factory Settings button for 6 seconds. Your router will return to the
factory configuration settings that are shown in the following table.
Feature
Router User login URL
login
User name (case-sensitive)
Login password (case-sensitive)
Internet WAN MAC address
Connection
WAN MTU size
Port speed
Local LAN IP
network
Subnet mask
(LAN)
RIP direction
RIP version
RIP authentication
DHCP server
DHCP starting IP address
DHCP ending IP address
DMZ
Time zone
Daylight saving time adjustment
Default Behavior
http://www.routerlogin.net or http://www.routerlogin.com
admin
password
Use default address
1500
AutoSense
192.168.0.1
255.255.255.0
None
Disabled
None
Enabled
192.168.0.2
192.168.0.254
Disabled
PST for North America, GMT for other locations
Disabled
Appendix A: Factory Default Settings and Technical Specifications
A
| 99