Table of Contents
Advertisement
Figure 2-10
2. Configure the Wireless LAN settings based on the following field descriptions:
•
Wireless Mode. Select the desired wireless operating mode. The default is 11ng. The
options are:
–
11b – All 802.11b wireless stations can be used. (The 802.11g wireless stations can
still be used if they can operate in 802.11b mode.)
Note: If you select this option and if other settings on this screen are
–
11bg – Both 802.11b and 802.11g wireless stations can be supported.
–
11ng – All 11b, 11g, and 11ng wireless stations can be used. This is the default. If you
select this option, then two additional options, Channel Width and Guard Interval, are
displayed.
•
Turn Radio On. On by default, you can also turn off the radio to disable access through
this device. This can be helpful for configuration, network tuning, or troubleshooting
activities.
Basic Installation and Configuration
ProSafe Dual Band Wireless Access Point WNDAP330 Reference Manual
disabled, then you must select the Turn Radio On radio button to
enable available options on this screen.
v1.0, May 2008
2-15
Advertisement
Table of Contents
