Table of Contents
Advertisement
ProSafe Dual Band Wireless Access Point WNDAP330 Reference Manual
Table A-1. Access Point Default Configuration Settings (continued)
Feature
DHCP Client
Time Zone
Time Zone Adjusted for Daylight Saving
Time
SNMP
Spanning Tree Protocol
Secure Telnet
Wireless
Operating Mode
Access Point Name
Wireless Communication
11a/n Wireless Network Name (SSID)
11 b/g/n Wireless Network Name (SSID) NETGEAR_11g
Broadcast Network Name SSID
Security
Transmission Speed
Country/Region
80211.a Radio Frequency Channel
80211.g Radio Frequency Channel
Output Power
Wireless Card Access List
WMM Support
a. Maximum Wireless signal rate derived from IEEE Standard 802.11 specifications. Actual throughput will vary.
Network conditions and environmental factors, including volume of network traffic, building materials and
construction, and network overhead, lower actual data throughput rate.
A-2
Description
Disabled
USA-Pacific
Disabled
Enabled, but Trap forwarding disabled
Disabled
Enabled
Access Point
netgearxxxxxx where xxxxxx are the last 6 digits of the
wireless access point MAC address.
Enabled
NETGEAR_11a
Enabled
Disabled
Best
a
Varies by region
Auto
Auto
Full
All wireless stations allowed
Enabled
Default Settings and Technical Specifications
v1.0, May 2008
Advertisement
Table of Contents
