Mazda RX-8 Owner's Manual page 291

RX-8_8BQ7-EA-10H_Edition1 Page291
Wednesday, July 14 2010 11:52 AM
NOTE
For vehicles with the navigation system, you
can also press the voice recognition/hands-free
switch with a short press and say: [Beep]
Telephone or Phone .
2. Say: [Beep] Voice training
3. Prompt: This operation must be
performed in a quiet environment while
the vehicle is stopped. See the owner's
manual for the list of required training
phrases. Press and release the phone
button when you are ready to begin.
Press and hold the phone button to
cancel at any time.
4. Press the voice recognition/hands-free
switch with a short press.
5. The voice guidance reads out the voice
input command number (refer to the
voice input command list for voice
recognition learning). (Ex. Please read
phrase 1 )
6. Say: [Beep] 0123456789 (Say the
voice input command for voice
recognition learning (1 to 8) according
to the voice guidance.)
7. Prompt: Speaker enrollment is
complete, returning to main menu.
Voice input command list for voice
recognition learning
When reading out, the following points
must be observed:
Read out the numbers one at a time
l
correctly and naturally.
Form No.8BQ7-EA-10H
Black plate (291,1)
Bluetooth Hands-Free
(For example, 1234 must be read out
one, two, three, four , not twelve, thirty
four .)
Do not read out parentheses. ( and
l
hyphens - are used for separating
numbers in a phone number.
Ex.
(888) 555-1212 must be spoken Eight, eight,
eight, five, five, five, one, two, one, two.
Phrase
1 0123456789
2 (888) 555-1212
3 Call
4 Dial
5 Setup
6 Cancel
7 Continue
8 Help
NOTE
After user voice registration is completed,
voice guidance Speaker enrollment is
complete, returning to main menu is
announced.
qDTMF (Dual Tone Multi-
Frequency Signal) Transmission
This function is used when transmitting
DTMF via the user's voice. The receiver
of a DTMF transmission is generally a
home telephone answering machine or a
company's automated guidance call center
(When you send tone signals back
according to the voice guidance
recording).
1. Press the voice recognition/hands-free
switch with a short press.
2. Say: [Beep] XXXX... send (Say
DTMF code)
3. Prompt: Sending XXXX... (DTMF
code)
Interior Comfort
Command
6-75