Mazda RX-8 Owner's Manual page 16

RX-8_8BQ7-EA-10H_Edition1 Page16
Wednesday, July 14 2010 11:49 AM
Essential Safety Equipment
Seats
(Dial type)
To change the seatback angle, lean
forward slightly while rotating the dial to
the desired position.
(Lever type)
To change the seatback angle, lean
forward slightly while raising the lever.
Then lean back to the desired position and
release the lever.
Make sure the lever returns to its original
position and the seatback is locked in
place by attempting to push it forward and
backward.
í
2-4
Some models.
Form No.8BQ7-EA-10H
Black plate (16,1)
CAUTION
When returning a rear-reclined
seatback to its upright position,
make sure you hold onto the
seatback with your other hand while
operating the lever or dial. If the
seatback is not supported, it will flip
forward suddenly and could cause
injury.
qHeight Adjustment (Driver's Seat)
To adjust the seat height, move the lever
up or down.
Up
Down
í