Mazda RX-8 Owner's Manual page 251

RX-8_8BQ7-EA-10H_Edition1 Page251
Wednesday, July 14 2010 11:51 AM
NOTE
Do not perform the following operation while
UPDATING is displayed. Otherwise, the
updating procedure will be cancelled.
Turning off the audio power
l
Switching to other modes
l
Switching the ignition off
l
When the SIRIUS mode is switched to
another mode, or when the power is
turned off, the present channel which is
being received is stored as the last
channel.
Channel selection
Turning the manual tuning dial allows you
to select the desired receiving channel.
Turn the knob clockwise: Channel Up
l
Turn the knob counterclockwise:
l
Channel Down
Unsubscribed channel
When a selected station has not been
subscribed to, the display indicates the
following:
[CALL 888] and [539
(Flashes alternately)
NOTE
When the subscription contract is canceled, all
of the channels including channel 184 appear
as unsubscribed.
Invalid channel
When a selected channel is not
broadcasting, [SR
INVALID] is displayed for one second,
followed by [SR
CHANNEL], which is also displayed for
one second. The display then returns to
the previous valid channel.
Form No.8BQ7-EA-10H
SIRI]
(bank number)
(bank number)
Black plate (251,1)
Audio System
NOTE
If the last channel selected has become
unavailable because of a channel update the
above indication is displayed until any button
is pressed.
Preset channel programming
(Programming with channel number
display)
1. Select the desired channel to be
programmed. At this point, the
following is displayed:
[SR (bank number)
number)]
2. Keep pressing the channel preset
button for 1.5 seconds or more.
The programming process is complete
after the channel number flashes. Then,
[SR (bank number)] is displayed
and a beep sound is heard at the same
time.
3. [SR (bank number)
(preset number) (channel number)]
are displayed.
(Programming with text display (e.g.
channel name))
1. Select the desired channel to be
programmed. At this point, the
following is displayed:
[SR (bank number)
(e.g. channel name))]
2. Keep pressing the channel preset
button for 1.5 seconds or more.
The programming process is complete
after the text (e.g. channel name)
flashes. Then, [SR
is displayed and you will hear beep
sound at the same time.
Interior Comfort
(channel
CH
(selected text
(bank number)]
6-35