Mazda RX-8 Owner's Manual page 246

RX-8_8BQ7-EA-10H_Edition1 Page246
Wednesday, July 14 2010 11:51 AM
Interior Comfort
Audio System
qOperating the Radio
Band selector button
Scan button
Seek tuning
button
Manual tuning dial
Radio ON
Press a band selector button (
turn the radio on.
Band selection
Successively pressing the band selector
button ( ) switches the bands as
follows: FM1→FM2→AM.
The selected mode will be indicated. If
FM stereo is being received, ST will be
displayed.
NOTE
If the FM broadcast signal becomes weak,
reception automatically changes from
STEREO to MONO for reduced noise, and the
ST indicator will go out.
6-30
Form No.8BQ7-EA-10H
Channel preset buttons
Tuning
) to The radio has the following tuning
methods: Manual, Seek, Scan, Preset
channel, and Auto memory tuning. The
easiest way to tune stations is to set them
on preset channels.
NOTE
If the power supply is interrupted (fuse blows
or the battery is disconnected), the preset
channels will be erased.
Manual tuning
Turning the manual tuning dial will
change the frequency higher or lower.
Seek tuning
Pressing the seek tuning button ( ,
will cause the tuner to seek a higher or
lower frequency automatically.
Black plate (246,1)
Auto memory
button
)