Mazda RX-8 Owner's Manual page 255

RX-8_8BQ7-EA-10H_Edition1 Page255
Wednesday, July 14 2010 11:51 AM
When the seek tuning button ( ) is
pressed for 1.5 seconds or longer, the
program is fast-forwarded while the
button is being pressed. When pressing
and holding the button until the end of the
program, the instant replay mode is
cancelled.
When the instant replay button is pressed
again, playback is paused, or playback
starts if it has been paused.
Instant replay (PAUSE)
If the instant replay button is pressed
while the instant replay mode is off,
instant replay mode is turned on in a
paused condition (PAUSE). Press the
instant replay button again to resume
playback from the point at which it was
paused.
NOTE
If the channel is changed, the instant replay
l
buffer data is deleted.
After turning on the power and switching to
l
SIRIUS digital satellite radio mode, the
instant replay mode is not available for
several seconds after changing channels.
Displaying the SIRIUS ID (ESN)
When the ESN button is pressed for 1.5
seconds or longer, a 12-digit Electronic
Serial Number (ESN) for the SIRIUS
tuner is displayed.
[SR (bank number)
of SIRIUS ID (ESN))] are displayed.
The four digits following the first eight
digits are displayed by turning the display
feed dial clockwise.
While the last four digits of the 12-digit
SIRIUS ID (ESN) are displayed, turning
the display feed dial displays the first
eight digits of SIRIUS ID (ESN).
Form No.8BQ7-EA-10H
(If the SIRIUS ID (ESN) for the tuner
does not display)
If ESN
pressing the ESN button for 1.5 seconds
or longer, contact an Authorized Mazda
Dealer.
Initialization of ID code
If the registered ID code is forgotten,
return the ID code to the default [0000] by
performing the following steps:
Setting condition: SAT mode
(Master code input preparation)
1. Press and hold the auto memory
2. ENTER PIN appears for two seconds
3. SR1 - - - - appears, which indicates
(Master code input)
4. Input the master code using the channel
(Master code input determination)
(first eight digits
5. Determine the master code which has
6. PIN CLEARED appears which
7. The ID code is set to the default [0000]
Black plate (255,1)
Audio System
FAIL is displayed after
button, then press channel preset button
4. Hold both buttons together for 1.5
seconds.
which indicates that it is in code input
mode.
that it is ready for code input.
preset buttons 1-4.
(The master code is already set at the
time of factory shipment.)
been input by pressing the auto
memory button.
indicates that the master code input has
been completed.
and the initialization process is
completed.
Interior Comfort
6-39