How To Confirm The Device Currently Linked; Deleting The Link To A Bluetooth Audio Device - Mazda CX-7 Owner's Manual

CX-7_8CG3-EA-11J_Edition1 Page305
Saturday, September 24 2011 10:33 AM
4. Turn the audio control dial to select the
name of the device you would like to
link.
5. Press the audio control dial to select the
device you would like to link.
The symbol disappears, and
PAIRING flashes in the display.
NOTE
When GO BACK is selected and the audio
control dial is pressed, the display returns to
LINK CHANGE .
6. If the link to the desired device is
successful, the
displayed again, together with
LINK CHANGED .
LINK CHANGED is displayed for
three seconds, then it returns to the
normal display.
Form No.8CG3-EA-11J
Device name 1
Device name 2
Device name 3
Device name 4
Device name 5
Device name 6
Device name 7
symbol is
Black plate (305,1)
Bluetooth® Audio
NOTE
®
Some Bluetooth audio devices need a
l
certain amount of time before the
symbol is displayed.
If a hands-free type mobile phone has been
l
the most recently programmed device, the
®
Bluetooth unit links this device. If you
would like to use a Bluetooth
device which has been previously
programmed to the Bluetooth
must be changed to this device.
If an error occurs while trying to link a
l
device, Err flashes in the display for
three seconds, and the display returns to
LINK CHANGE . If this occurs, check the
programming status of the Bluetooth
audio device and the location of the device
in the vehicle (not in the trunk or a metal-
type box), and then try the link operation
again.
Device selection can also be done using
l
voice recognition (page 6-92).
How to confirm the device currently
linked
Switch to the link-change mode. (Refer to
Changing the link to a Bluetooth
device )
The device name displayed first is the
device which is currently linked.
Deleting the link to a Bluetooth
device
1. Using the audio control dial, select the
pairing delete mode PAIR DELETE
in the BT SETUP mode. (Refer to
®
Bluetooth audio device set-up for
details.)
2. Press the audio control dial to
determine the mode.
3. The name of the first device among the
programmed devices is displayed.
Interior Comfort
®
audio type
®
unit, the link
®
®
audio
®
audio
6-67