To Remove The Jack; To Secure The Jack; Spare Tire - Mazda CX-7 Owner's Manual

Hide thumbs Also See for CX-7:
Table of Contents

Advertisement

CX-7_8CG3-EA-11J_Edition1 Page372
Saturday, September 24 2011 10:33 AM
In Case of an Emergency
Flat Tire
qJack

To remove the jack

1. Remove the trunk board.
Trunk board
2. Turn the wing bolt and jack screw
counterclockwise.
Wing bolt
Jack screw
NOTE
The jack can be removed from the rear door if
the rear seatback is folded forward.
Refer to Split-Folding Rear Seatback on page
2-10.

To secure the jack

1. Turn the wing bolt clockwise and
temporarily tighten it.
2. Turn the jack screw clockwise and
extend the jack to secure it to the
vehicle.
7-4
Form No.8CG3-EA-11J
Black plate (372,1)
3. Turn the wing bolt and tighten it
completely.
Maintenance
Always keep the jack clean.
l
Make sure the moving parts are kept
l
free from dirt or rust.
Make sure the screw thread is
l
adequately lubricated.
qSpare Tire
Your Mazda has a temporary spare tire.
The temporary spare tire is lighter and
smaller than a conventional tire, and is
designed only for emergency use and
should be used only for VERY short
periods. Temporary spare tires should
NEVER be used for long drives or
extended periods.
WARNING
Do not install the temporary spare tire
on the front wheels (driving wheels):
Driving with the temporary spare tire
on one of the front driving wheels is
dangerous. Handling will be affected.
You could lose control of the vehicle,
especially on ice or snow bound
roads, and have an accident. Move a
regular tire to the front wheel and
install the temporary spare tire to the
rear.

Advertisement

Table of Contents
loading

Table of Contents