Voice Recognition Learning Function (Speaker Enrollment); When Voice Recognition Learning Is Done For The First Time - Mazda CX-7 Owner's Manual

CX-7_8CG3-EA-11J_Edition1 Page337
Saturday, September 24 2011 10:33 AM
5. Prompt: Confirmation prompts are
on/off. Would you like to turn
confirmation prompts off/on?
6. Say: [Beep] Yes
7. (Without 7-inch navigation system)
Prompt: Confirmation prompts are
off/on.
(With 7-inch navigation system)
Prompt: Confirmation prompts are
off/on, returning to main menu.
qVoice Recognition Learning
Function (Speaker Enrollment)
The voice recognition learning function
enables voice recognition appropriate to
the characteristics of the user's voice.
If the recognition of the voice input
commands to the system is not adequate,
this function can largely improve the
system's voice recognition of the user. If
your voice can be recognized sufficiently
without using this function, you may not
realize the added benefit of the function.
To register your voice, the voice input
command list must be read out. Read out
the list when the vehicle is parked.
Perform the registration in as quiet a place
as possible (page 6-74).
The registration must be performed
completely. The required time is a few
minutes. The user needs to be seated in
the driver's seat with the voice input
command list for voice recognition
learning open to the page indicated below.
When voice recognition learning is
done for the first time
1. Press the pick-up button (with/without
7-inch navigation system) or talk
button with a short press (without 7-
inch navigation system) or a long press
(with 7-inch navigation system).
Form No.8CG3-EA-11J
Black plate (337,1)
Bluetooth® Hands-Free
NOTE
For vehicles with the 7-inch navigation system,
you can also press the talk button with a short
press and say: [Beep] Telephone or
Phone .
2. Say: [Beep] Voice training
3. Prompt: This operation must be
performed in a quiet environment while
the vehicle is stopped. See the owner's
manual for the list of required training
phrases. Press and release the talk
button when you are ready to begin.
Press the hangup button to cancel at
any time.
4. Press the talk button with a short press.
5. The voice guidance reads out the voice
input command number (refer to the
voice input command list for voice
recognition learning). (Ex. Please read
phrase 1 )
6. Say: [Beep] 0123456789 (Say the
voice input command for voice
recognition learning (1 to 8) according
to the voice guidance.)
7. (Without 7-inch navigation system)
Prompt: Speaker enrollment is
complete.
(With 7-inch navigation system)
Prompt: Speaker enrollment is
complete, returning to main menu.
NOTE
If an error occurred in the voice recognition
learning, re-learning can be done by pressing
the talk button with a short press.
Interior Comfort
6-99