Child-Restraint System Installation Procedure (Rear Outboard Seats); Anchor Bracket Location; Tether Strap Position - Mazda CX-7 Owner's Manual

CX-7_8CG3-EA-11J_Edition1 Page54
Saturday, September 24 2011 10:31 AM
Essential Safety Equipment
Child Restraint
qChild-Restraint System Installation
Procedure (Rear Outboard Seats)
1. Make sure the seatback is securely
latched by pushing it back until it is
fully locked.
2. Expand the open seams on the rear of
the seat bottom slightly to verify the
locations of the LATCH lower anchors.
NOTE
The markings above the LATCH lower anchors
indicate the locations of LATCH lower
anchors for the attachment of a child-restraint
system.
3. Raise the head restraint to the top
locked position.
Refer to Head Restraints on page 2-12.
4. Secure the child-restraint system using
BOTH LATCH lower anchors,
following the child-restraint system
manufacturer's instruction. Pull on the
child-restraint to be sure both anchors
are engaged.
2-42
Form No.8CG3-EA-11J
Black plate (54,1)
5. If your child-restraint system came
equipped with a tether, that means it is
very important to properly secure the
tether for child safety. Please carefully
follow the child-restraint system
manufacturer's instructions when
installing tethers.

Anchor bracket location

Tether strap position

Tether strap
Forward