How To Confirm The Device Currently Linked (Bluetooth) - Mazda 6 Owner's Manual

NOTE
Some Bluetooth
a certain amount of time before the
" " symbol is displayed.
If a hands-free type mobile phone has
been the most recently paired device,
the Bluetooth
®
If you would like to use a Bluetooth
audio type device which has been
previously paired to the Bluetooth
unit, the link must be changed to this
device.
If an error occurs while trying to link
a device, " Err " ashes in the display
for three seconds, and the display
returns to " LINK CHANGE ". If this
occurs, check the pairing status of
the Bluetooth
®
location of the device in the vehicle
(not in the luggage compartment/
boot or a metal-type box), and then
try the link operation again.
Device selection can also be done
using voice recognition.
How to con rm the device currently
linked
Switch to the link-change mode. (Refer to
"Changing the link to a Bluetooth
device")
The device name displayed rst is the
device which is currently linked.
audio devices need
®
unit links this device.
audio device and the
audio
®
Deleting a device
1. Using the audio control dial, select the
pairing delete mode " PAIR DELETE "
in the " BT SETUP " mode. (Refer to
"Bluetooth
details.)
2. Press the audio control dial to
determine the mode.
®
3. The name of the rst device among the
paired devices is displayed.
®
4. Rotate the audio control dial and select
the name of the paired device you
would like to delete.
NOTE
Only the names of paired devices can
be displayed. If only one device is
paired, only the name for this device is
displayed.
5. If a selection other than " GO BACK "
is made and the audio control dial is
pressed, " SURE ? NO " is displayed.
Interior Features
Bluetooth
audio device set-up" for
®
Device name 1
Device name 2
Device name 3
Device name 4
Device name 5
Device name 6
Device name 7
®
5–99