Security Indicator Light; Headlight High-Beam Indicator Light; Shift Position Indicator Light - Mazda CX-7 Owner's Manual

CX-7_8CG3-EA-11J_Edition1 Page217
Saturday, September 24 2011 10:32 AM
NOTE
The advanced key can be set so that the KEY
indicator light (green) does not flash even if
the battery power is low.
Refer to Personalization Features on page
10-8.
qSecurity Indicator Light
This indicator light starts flashing every 2
seconds when the ignition is switched
from ON to ACC and the immobilizer
system is armed.
The light stops flashing when the ignition
is switched ON with the correct ignition
key.
At this time, the immobilizer system is
disarmed and the light illuminates for
about 3 seconds and then turns off.
If the engine does not start with the
correct ignition key, and the security
indicator light keeps illuminating or
flashing, the system may have a
malfunction. Consult an Authorized
Mazda Dealer.
Form No.8CG3-EA-11J
Warning/Indicator Lights and Beep Sounds
qHeadlight High-Beam Indicator
This light indicates one of two things:
l
l
qShift Position Indicator Light
This indicates the selected shift position
when the ignition is switched to ON.
In manual mode, the M of the shift
position indicator illuminates and the
numeral for the selected gear displays in
the gear position indicator.
Black plate (217,1)
Light
The high-beam headlights are on.
The turn signal lever is in the flash-to-
pass position.
Gear position indicator
Driving Your Mazda
5-57