Baby Lock ellure BLR Instruction And Reference Manual page 170

— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
APPENDIX
Symptom
Nothing appears The brightness of the LCD is either
in the LCD. too light or too dark.
Machine does not
An animation is displayed on the
operate when
LCD.
button is pressed.
No pattern selected.
Embroidery unit
does not move. The embroidery unit is not set up
correctly.
The fabric is not fully stretched on
the embroidery frame. The fabric
is loose.
No stabilizer material is attached.
The thread is tangled and the
bobbin case, etc., is plugged up.
The thread tension is incorrect.
Objects are placed near the
Embroidery not carriage or embroidery frame.
neatly done.
Material coming out of the
embroidery frame is causing
problems.
A heavy fabric is being
embroidered, and the fabric is
hanging off the table.
The fabric is catching. It is
pinched.
The carriage was moved while the
embroidery frame was being
removed or attached during
embroidery.
168
Probable Cause Remedy
Adjust the brightness of the LCD.
Touch the LCD with your finger, and
the animation will disappear.
Select a pattern.
Set the embroidery unit up correctly.
Stretch the fabric properly on the
embroidery frame.
Always use stabilizer material for
embroidery with stretch fabrics, thin
fabrics, fabrics with a loose weave
and fabrics where stitches easily
contract.
Remove the tangled thread. When
the bobbin case is plugged up, clean
the race and the bobbin case.
Adjust the tension of the upper
thread.
If the embroidery unit carriage or
embroidery frame bumps into objects,
the pattern will be misaligned. Do not
place objects within the range of
embroidery frame motion.
Stretch the fabric on the frame once
again so that the material coming out
of the embroidery frame does not
cause problems, rotate the pattern
and embroider.
If embroidery is done with the fabric
hanging off the table, the embroidery
unit movement will be impaired.
Support the fabric while embroidering.
Stop the sewing machine and set the
fabric up correctly.
If the carriage is moved during the
process, the pattern may be misaligned.
Be careful when removing or
attaching the embroidery frame.
Reference
page 172
page 18
page 142
page 133
page 137
page 136
page 162
page 156
page 134
–
–
–
–