Quilting - Baby Lock ellure BLR Instruction And Reference Manual

— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
■ For a seam allowance on the left side
Align the left side of the presser foot with the
edge of the fabric, and sew using stitch
a 7 mm (1/4 inch)
Memo
To change the width of the seam allowance
(needle position), adjust the stitch width. For
details, refer to "Adjusting the stitch width"
(page 56).
1

Quilting

22
.
Sandwiching batting between the top and bottom
layers of fabric is called "quilting". Quilts can easily
be sewn using the optional walking foot and the
quilting guide.
a Baste the fabric to be quilted.
b
Remove the presser foot holder.
• For details, refer to "Removing and attaching
the presser foot holder" (page 44).
c Hook the connecting fork of the walking foot
onto the needle clamp screw.
a Connecting fork
b Needle clamp screw
d
Lower the presser foot lever, insert the presser
foot holder screw, and then tighten the screw
with the screwdriver.
a Presser foot holder screw
The walking foot is attached.
CAUTION
● Be sure to securely tighten the screws
with the screwdriver, otherwise the
needle may touch the presser foot,
causing it to bend or break.
● Before starting to sew, slowly turn the
handwheel toward you (counterclockwise)
and check that the needle does not touch
the presser foot. If the needle hits the
presser foot, the needle may bend or break.
Appliqué, Patchwork and Quilt Stitching 99
a
b
a
3