Editing And Saving Patterns; Adjusting The Layout - Baby Lock ellure BLR Instruction And Reference Manual

— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —

Editing and Saving Patterns

This section describes ways to edit, adjust, reposition and memorize patterns.

Adjusting the layout

The pattern is normally positioned in the center of the
embroidery frame.
You can check the layout before starting embroidery
and change the position and the size.
Memo
Keys that appear surrounded with a dotted
line cannot be used.
a After selecting the embroidery pattern, press
.
The sewing screen is displayed.
b Press
The layout LCD is displayed.
.
c Check and adjust the layout.
a b c d e f
k
j
a Layout within the frame
b Available embroidery frames
c Display unit (cm/INCH)
d Change position keys
e Size key
f Layout key
g Rotation key
h Horizontal mirror image key
i Distance from the center
j Embroidery size (cm)
k Starting point key
Embroidery frame size
These flash if the pattern was resized
the layout was adjusted, or the
recommended embroidery frame size
was changed. Embroidery frame icons
that appear in gray cannot be used.
Size key
Increases/decreases the size of the
pattern. Press
previous screen.
Decreases size
Returns to original size
Increases size
Change position keys
Moves the embroidery position up,
down, left and right.
Return to center position (when the
pattern was moved with the change
position key)
• If you make a note of the values in the lower
part of screen when you change the size and
position, you can sew with the same size and
layout even if you have to turn the power
back on in the middle of your work.
Editing and Saving Patterns 153
g
h
i
4
to return to the